Home>Product introduction>Industry-graded PAFC

Industry-graded PAFC

Liquid PAFC

Characteristics of PAFC:

Brown or bronzing liquid, non-toxic, harmless, microscale irritating odor.


Application :

The products are mainly used for purifying drinking water and industrial sewage treatment, such as radioactive substances, wastewater with  Lead

(Pb) and Chromium (Cr)  and Fluorine(F),it is also can be used use in the field of Precision casting, papermaking and process hides  etc.

It’s efficiency of wastewater treatment is better than that of Alum, polymerization iron sulfate and ferric trichloride.


Packing and Transportation:

Packing in Polyethylene plastic drum, with double bung, the inner cover is tightly buckled, the outer cover is screwed tightly, net weight:25kgs ,50kgs or 200kgs.. this product is also transported by tank car.



Before the use of products, you can diluted with  3~5 times of water, and PH value of water is 6~10, then add the right amount of PAC liquid to treat wastewater, the COD value of wastewater will effect its dosage, you can do the coagulation and sedimentation experiment to determine the best dosage according to wastewater turbidity .


Item Standard
Al2O3 (m/m):: % ≥ 10
Fe2O3 (m/m):: % ≥ 1.0~4.0
Alkalized degree:% 60~95
PH value(10% aqueous solution) 3.5~5.0
Water-insoluble (m/m): % ≤ 0.5
As (m/m): % ≤ 0.0003
Pb (m/m): % ≤ 0.001
Bulk Density(20℃)/(g/cm3)≥ 1.19

Note: the impurities m/m of liquid products such as Insoluble,As, Pb, Fe and so on is calculated according to 10.0% of Al2O3. when the content of Al2O3  is not equal to 10%, the actual content should be converted into 10.0% of Al2O3,And then we can calculate corresponding mass fraction as per its ratio.